2ml Pre-Filled Pod Cartridges — Ceramic or Mesh

What These Cartridges Are

These are 2.0ml pre-filled pod cartridges, supplied as a finished consumable. Each cartridge carries its own heating element, so a replacement restores a fresh element rather than asking one coil to survive the life of the hardware.

Cartridges measure 45.9 × 19.7 × 10.7 mm and fit a widely adopted format used across the pod category. They pair with our A03 battery base and with other devices built on the same fitting.

Specifications

Ceramic or Mesh: Match the Element to the Liquid

The element decides which e-liquids the cartridge can carry well. Getting this wrong produces dry hits, muted flavor, or premature wick failure — and the complaint reaches you, not the factory.

Ceramic heats through a porous body with a large surface area. It feeds thicker, more viscous liquids that a standard wick cannot draw fast enough, and it tolerates higher-sugar profiles without scorching as quickly.

Mesh heats through a perforated metal sheet. It reaches temperature faster and reproduces bright, sharp profiles more accurately, which suits standard-viscosity nicotine e-liquids.

Most ranges use both. Specify ceramic for the dense dessert and cream profiles, mesh for the fruit and menthol lines, and the shelf set stays consistent while each flavor performs.

E-Liquid and Flavor Development

E-liquid is produced under GMP- and ISO 9001-controlled processes, and filling happens on the line that seals the cartridge.

Select from a curated range of 48 flavors, or brief a custom profile against our formulation library of more than 500 flavors. Nicotine is configured from 0 to 20mg/ml, in salt or freebase, according to your specification and the requirements of the destination market.

Custom flavor development adds time ahead of the production window. If your program depends on a signature blend rather than a catalog pick, build that stage into your launch calendar.

Why the Consumable Line Deserves Its Own Forecast

Hardware ships once per user. Cartridges ship again every time that user comes back. Those are two different demand curves, and planning them as one is the most common forecasting error in a pod program.

Base volume tracks acquisition. Cartridge volume tracks retention, and it compounds. A range that holds its buyers will order cartridges several times before it reorders hardware.

Tell us your expected cartridges-per-device figure at the quotation stage. We structure the run around it rather than quoting the two lines in isolation.

Branding and Packaging

Cartridges are the part your customer repurchases, so packaging carries more weight here than on hardware bought once. Artwork reaches the buyer again at every repeat purchase.

• Printed cartridge packaging, sized to your retail channel
• Multipack formats — two, three, and four-cartridge configurations are common
• UV printing for logo blocks, batch codes, and market-required text panels
• Flavor-coded color systems across a range, so a shelf set reads at a glance

Send artwork as vector files with Pantone references. We return a printed sample before the run starts.

Manufacturing and Quality Control

Cartridge production runs through a four-stage inspection chain: IQC → IPQC → FQC → OQC. Incoming elements, housings, and seals are checked before they reach the floor. In-process checks cover fill volume, seal integrity, and element seating.

Leak testing is the stage that matters most on a consumable. A cartridge that seeps in transit reaches the distributor as a full-carton problem, so each batch is sampled for seal performance under pressure and temperature variation.

Final inspection samples for fill accuracy, element resistance, and print registration. Outgoing inspection verifies carton counts, labeling, and packaging against your purchase order. Device test reports and e-liquid documentation accompany each shipment.

Every batch is built to the standards of the destination market you nominate. Tell us where the goods land at the quotation stage, and the specification is configured for that market before the run starts.

Ordering

Minimums start at 2,000 units per flavor. Production runs Typically 25–30 Days after artwork approval and e-liquid sign-off. Flavor development and printed proofs happen before that window opens.

Message us on WhatsApp or email your specification, and we will come back with a configuration sheet built around your flavor range, nicotine strengths, and market.

Frequently Asked Questions

Do these cartridges arrive filled?

Yes. They ship pre-filled and sealed, with flavor and nicotine configured to your specification.

Which devices do they fit?

They pair with our A03 battery base and with other devices built on the same widely adopted format, including RELX-style hardware.

Can one order mix ceramic and mesh?

Yes, and most ranges do. Element type is set per flavor, so dense profiles run on ceramic while brighter profiles run on mesh.

What nicotine strengths are available?

From 0 to 20mg/ml, in salt or freebase. Strength is set per flavor alongside the e-liquid selection and the requirements of your market.

Can we develop a flavor that is not in the catalog?

Yes. Custom profiles are briefed against a formulation library of more than 500 flavors. Development runs ahead of the production window, so allow for it in your launch calendar.

Do you supply documentation?

E-liquid documentation and device test reports are supplied with each shipment. Registration and market filings remain the responsibility of the brand owner, and we provide the technical files those filings require.